In racnode-1 disk sdb is mapped to sdf in ranode-2
In racnode-1 disk sdc is mapped to sdd in ranode-2
In racnode-1 disk sdd is mapped to sde in ranode-2
First I have created three raw partitions from my raw devices sdb, sdc and sdd of racnode-1 each of 80GB for ASM.
[root@racnode-1 ~]# /sbin/fdisk /dev/sdb
The number of cylinders for this disk is set to 19581.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (33-19581, default 33): +80000M
Last cylinder or +size or +sizeM or +sizeK (9726-19581, default 19581):
Using default value 19581
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[root@racnode-1 ~]# /sbin/fdisk /dev/sdc
The number of cylinders for this disk is set to 19581.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (33-19581, default 33):
Using default value 33
Last cylinder or +size or +sizeM or +sizeK (33-19581, default 19581): +80000M
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[root@racnode-1 ~]# /sbin/fdisk /dev/sdd
The number of cylinders for this disk is set to 19581.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (33-19581, default 33):
Using default value 33
Last cylinder or +size or +sizeM or +sizeK (33-19581, default 19581): +80000M
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
For RACNODE-1
[root@racnode-1 ~]# vi /etc/udev/rules.d/63-oracle-raw.rules
ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw6 %N"
ACTION=="add", KERNEL=="sdc2", RUN+="/bin/raw /dev/raw/raw7 %N"
ACTION=="add", KERNEL=="sdd2", RUN+="/bin/raw /dev/raw/raw8 %N"
KERNEL=="raw[6-8]*", OWNER="oracle", GROUP="oinstall", MODE="644"
Then reboot the node if it suggest as in this example. The new table will be used at the next reboot.
[root@racnode-1 ~]# reboot
For immediate affect if you don't see any reboot message,
#/bin/raw /dev/raw/raw6 /dev/sdb2
/bin/raw /dev/raw/raw7 /dev/sdc2
/bin/raw /dev/raw/raw8 /dev/sdd2
Adjust the permission settings by,
#chown oracle:oinstall /dev/raw/raw6
chown oracle:oinstall /dev/raw/raw7
chown oracle:oinstall /dev/raw/raw8
chmod 640 /dev/raw/raw6
chmod 640 /dev/raw/raw7
chmod 640 /dev/raw/raw8
For RACNODE-2
[root@racnode-2 ~]# vi /etc/udev/rules.d/63-oracle-raw.rules
ACTION=="add", KERNEL=="sdf2", RUN+="/bin/raw /dev/raw/raw6 %N"
ACTION=="add", KERNEL=="sdd2", RUN+="/bin/raw /dev/raw/raw7 %N"
ACTION=="add", KERNEL=="sde2", RUN+="/bin/raw /dev/raw/raw8 %N"
KERNEL=="raw[6-8]*", OWNER="oracle", GROUP="oinstall", MODE="644"
Then reboot the node if it suggest as in this example. The new table will be used at the next reboot.
[root@racnode-2 ~]# reboot
For immediate affect, if you don't see any reboot message
#/bin/raw /dev/raw/raw6 /dev/sdf2
/bin/raw /dev/raw/raw7 /dev/sdd2
/bin/raw /dev/raw/raw8 /dev/sde2
and adjust the permission settings by,
#chown oracle:oinstall /dev/raw/raw6
chown oracle:oinstall /dev/raw/raw7
chown oracle:oinstall /dev/raw/raw8
chmod 640 /dev/raw/raw6
chmod 640 /dev/raw/raw7
chmod 640 /dev/raw/raw8
Related Documents
No comments:
Post a Comment